EVD TX2.1
2x 1050W Power Amplifier
The TX series professional amplifier using special circuit design techniques, focusing on stability of the amplifier in the long term continuous full power conditions, the main components of the PCB board using SMT Technologies manufacturing, and circuit layout design through computer simulated system, so that the amplifier has a very high signal to noise ratio and anti-jamming capability.
The TX series with higher damping and perfect filtering system, so that high frequency is more delicate and soft, low frequency is more flexible.
Technical Specifications:
OUTPUT POWER (EIA 1Khz 1%THD) |
Stereo Power (8 ohms) | 2 x 1050W |
Stereo Power (4 ohms) | 2 x 1700W | |
Bridge Power (8 ohms) | 3400W | |
FREQUENCY RESPONSE | 20Hz – 20KHz ±1dB | |
INPUT SENSITIVITY | 0.77V | |
SIGNAL TO NOISE | ≥95dB | |
THD | ≤0.3% | |
INPUT IMPEDANCE | Balance | 20KΩ |
Un-Balance | 10KΩ | |
CROSS TALK (8 ohm 1KHz) |
>70dB | |
DAMPING FACTOR (5Hz – 1KHz) |
>240 | |
SLEW RATE | 15V/uS | |
PROTECTION FUNCTION | Soft Start/ Overheating/ Over Current/ Direct Current/ Radio Frequency | |
MAIN POWER SUPPLY | AC 220-230V 50Hz/ 60Hz | |
DIMENSION (WxDxH)mm | 482 x 487 x 88 | |
NET WEIGHT | 26.7KG |