COBRA-4 TOP 15-INCH THREE-WAY POWERED LINE ARRAY

Product Code: COBRA-4 TOP
Availability: In Stock

DYNACORD´s COBRA-4-TOP is an active 3-Way cabinet for use as a nearfield cabinet in compact line arrays and other demanding applications, where wide horizontal coverage, extremely low distortion and a low sensitivity against acoustic feedback are mandatory.

Depending on the application, the COBRA-4-TOP cabinet can be used up to 40m throw distance. The mid-range of the COBRA-4- TOP uses selected DYNACORD C8 cone transducers in a line array configuration. The C8 transducers show significantly lower distortion than typical horn/compression driver combinations.

Therefore an extremely natural sound quality over large distances can be achieved. For the high frequencies of the COBRA-4-TOP an Electro-Voice DH2T titanium diaphragm driver and a HPT94 constant directivity horn are used in order to prevent any set-up and adjustment problems for the main direction and the near field. The DYNACORD COBRA-4-TOP uses a dual vented direct- radiator design equipped with an Electro-Voice EVX155 for the low frequencies. For Near-Fill and Side-Fill applications and for the reinforcement of speech the COBRA-4-TOP cabinets can be used fullrange without any problems.

The cabinet is equipped with an electronic circuit called VOICE COIL TRACKING PROTECTION. This circuit senses the terminal voltage of the transducers and simulates the thermal behaviour of the transducer voice coils. In case of potential thermal overload the power applied to the speakers is reduced to a safe level. Power amps up to 1200W/8Ohms can be used in order to have maximum dynamic range without the danger of thermal overload in non-controlled situations. The VOICE COIL TRACKING PROTECTION exhibits "soft" switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperatures have reached a safe value.

Frequency response ( -10dB ) 90Hz - 17kHz
Weight Net 120.15lbs (54.5kg)
Active crossover frequency 124Hz - 700Hz - 4kHz
Ancra Tracks 4
Castors 4
Components HIGH DH 2T / HPT 94
Components LOW EVX155
Components Mid C8 Line array
Configuration Compact line array / active 3-way
Connector model Speakon 2x NL8 MPR
Connector wiring HIGH 8-pole 4+/4-
Connector wiring LOW 8-pole 2+/2-
Connector wiring MID 8-pole 3+/3-
Coverage angle 1 kHz (-6dB) H 120° x V 30°
Coverage angle 10kHz (-6dB) H 90° x V 40°
Dimensions 600 x 495 x 717
Enclosure Material Birch plywood 18mm
Finish Black polyurethane
Front cover 1
Grille Powder coated steel
Handles 2
Max. SPL/1m (calc) 131dB
measured with DSP 244 preset COB4PWHTOP200203
Nominal Impedance 8Ω 
Program power: LOW - MID - HIGH 800W - 400W - 200W
Rated power RMS: LOW - MID - HIGH 400W - 200W - 100W
Shipping Weight 60kg 
Speaker Type MID - HIGH Cabinet
SPL 2,83 V / 1m 1 W / 8 Ohm 100dB
Voice coil tracking protection LOW - MID - HIGH
Webbing strap point 2