Product Code: COBRA-TOP
Availability: In Stock

DYNACORD´s COBRA-TOP is a 3-Way cabinet for use in compact line arrays and other demanding applications where wide horizontal coverage, extremely low distortion and a low sensitivity against acoustic feedback are mandatory.

The mid-range of the COBRA-TOP uses selected DYNACORD C8 cone transducers in a line array configuration. The C8 transducers show significantly lower distortion than typical horn/compression driver combinations. Therefore an extremely natural sound quality over large distances can be achieved. For the high frequencies of the COBRA-TOP an Electro-Voice DH2T titanium diaphragm driver and a HPT94 constant directivity horn are used in order to prevent any set-up and adjustment problems for the main direction and the near field. The DYNACORD COBRA-TOP uses a dual vented direct-radiator design equipped with an Electro-Voice EVX 155 for the low frequencies. For Near-Fill and Side-Fill applications and for the reinforcement of speech the COBRA-TOP cabinets can be used fullrange without any problems.

The cabinet is equipped with an electronic circuit called VOICE COIL TRACKING PROTECTION. This circuit senses the terminal voltage of the transducers and simulates the thermal behaviour of the transducer voice coils. In case of potential thermal overload the power applied to the speakers is reduced to a safe level. Power amps up to 1200W/8Ohms can be used in order to have maximum dynamic range without the danger of thermal overload in non-controlled situations. The VOICE COIL TRACKING PROTECTION exhibits "soft" switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperatures have reached a safe value.

Weight Net 132.28lbs (60kg)
Ancra Tracks 4 pcs.
Cabinet type Passive 3-way
Castors 4x 100mm
Coating Polyurethane
Components HIGH DH 2T / HPT 94
Components LOW EVX 155
Components Mid C8 Line array
Connections Speakon 2x NL4 MPR
Connectors FR 4-pole 1+/1-
Connectors LO - MID - HIGH 4-pole 2+/2- (SYSTEM)
Dimensions 600 x 495 x 717
Disp. Angle 1 kHz -6dB H 120° x V 30°
Disp. Angle 10kHz -6dB H 90° x V 40°
Frequency range ( -10dB ) 50Hz - 15kHz
Front cover 1 pcs.
Handles 2 pcs.
Impedance 8Ω 
Int. Passive Crossover 700Hz - 4kHz
Max. SPL/1m (calc) 131dB
Outfit Black
Program power 1200W
Rated power RMS 600W
Rec. Active Crossover 124Hz
Shipping Weight 65kg 
Speaker Type 18mm
SPL 1W / 1m 100dB
Steel grille Powder coated
Style Birch plywood
Voice coil tracking protection LOW - MID - HIGH
Webbing strap point 2 pcs.